Here on this page, you can Download Redmi Note 6 Pro Flash File (Stock Firmware Rom) to flash the Xiaomi smartphone. we share here the latest official Redmi Note 6 Pro Firmware that helps to recover your devices from the various problems. Stock Rom file comes with a zip or file extension, you need to download WinRAR or 7zip to extract the firmware file. inside the zip file, you can find the firmware file along with how to flash manual, Stock firmware, Flash Tool, and USB Driver.
What is Flash File (Firmware ROM)
Redmi Note 6 Pro Flash File is a program software file, also known as the Redmi Note 6 Pro Firmware file. It’s installed on the ROM (read-only memory) partition of Xiaomi devices. Stock Firmware helps us to recover and repair our devices from various software problems like stuck on logo, Bootloop, virus, Unroot the root permission, Fix bugs and many more.
Download Redmi Note 6 Pro Flash File (Firmware Fastboot ROM)
BENEFIT FOR FLASHING STOCK FIRMWARE:-
- -Download and extract Redmi Note 6 Pro Fastboot Firmware On your Computer.
- -After extracting all the files on your computer you will see 3 folders on your computer.[flash file, USB driver, flash tool Folder and how to flash manual].
- -Open USB driver folder and Install USB driver on your computer.
- -you have successfully flash Redmi Note 6 Pro Flash File.
How to Put your device into EDL Mode:-
- First, Power Off on your device.
- Then remove the back cover of your device.
- Then sort this below two pin of your device.
Samsung T725 Flash File-Here
How to Flash Redmi Note 6 Pro Firmware
- Download the firmware first on your device.
- After that, extract the downloaded firmware using 7zip or WinRAR.
- Then open the extracted folder, and check (if the ROM file extension is ‘.tgz’ or ‘.gz’, please rename it to ‘.tgz’)
- Re again extract the renamed .tgz file.
- Then open the folder and there you will see Firmware files.
- Now download the MI Flash Tool.
- Once downloaded then extract and the flash tool on your device.
- Now run the MI Flash Tool.
- Then click on the select button and select the Redmi Note 6 Pro firmware on the MI flash tool.
- Connect your device and then connect your device to PC.
- After that, click on the refresh button and then you need to connect your device to PC.
- Then click on the Flash button to Start flashing.
- Wait for the finish.
- Once flashing finish, then disconnect your device from PC and Power on.
- That’s it. You have successfully flashing Redmi Note 6 pro Firmware.